Bale Documentation now supported in Operations Center

Overview

Documentation data from your large square baler paired with a Gen 4 display can now be viewed and analyzed in Operations Center. This allows you to have a complete set of records across your farm so you can analyze your crop throughout the entire season. Pairing the Gen 4 display with a JDLink™ modem you can easily send you data to Operations Center; not only that, but you can monitor in near-real-time the yield and moisture that the baler is reading from the crop. Having all this data seamlessly in Operations center allows you to know when to pull the crop out of production and reseed if necessary. Or you can see if the yield has decreased between cuttings showing you when you may want to make a change to your irrigation cycle. The moisture map can highlight where there are issues with dry down in the field.

Details

The following is required to get your baling data into Operations Center:

• Model Year 2018 or newer, 1 series (331 or 341), large square baler

• Generation 4 or newer display with 23-1 DTAC release or newer software

• SF3000 or newer GPS receiver

• Baler requirements are:

o Updated baler controller payload

o Moisture sensor

o Weighing system

o Crop detection sensor and bracket