Selling Price -
$3,300.00
- Width:48 in
 - Transmission:Hydro
 - Engine Type:Gas
 - Drive Type:2WD
 
- 2019
 - John Deere
 - X394
 - Base
 - Riding
 - Model: FS651V
 - Overhead valve, full-pressure lube, oil filter
 - 22 hp (16.4 kW)
 - 44.3 cu in. (726 cc)
 - V-twin, cast-iron liners
 - Mechanical
 - Separate levers, automatic choke return
 - Air
 - Dry, replaceable with foam precleaner
 - Transaxle: Internal, not replaceable
 - Gasoline
 - Delivery: Pulse pump, carburetor
 - Gauge on dash
 - Power, hydraulic
 - Mower: Electric power take-off (PTO) clutch, in-line belt | Mower attachability: Dual belt
 - Fuel tank location: Rear | Hourmeter | Cruise Control: button on dash | Oil cooler: Fins and fan on transaxle | Primer/paint: E-coat/powder | Floor mats: Sure-grip rubber | Storage: On fender and under seat | Service interval decal | Cup holder | All-wheel steer | Tilt steering wheel: Standard, five position | Preset cut height | Mower deck type: Side discharge | Mower wash port | Mower level adjustment: Exact Adjust ports and onboard deck-leveling gauge
 - Internal wet disc
 - Cast iron front axle, front wheel ball bearings
 - 15x6.5-8
 - 22x9.5-12
 - Mower: Four | Mower, adjustment: Seven-position, spring-loaded pin | Mower, rotate: 90 degrees for easy mower removal
 - Engine: Bendix
 - Flywheel alternator, regulated, 15 amp
 - 12 V (340 CCA)
 - Transaxle Forward speed: 0-6.2 mph (0-10 km/h) | Transaxle Reverse speed: 0-3.5 mph (0-5.6 km/h)
 - Equipment mounting: heavy duty | Mower attachability: Roll under tractor | Front draft arms: Attached with spring pins at two points | Rear draft arms: Quick-pull pins
 - Welded heavy-duty
 - Fuel fill opening, On left fender: 3 in. (7.6 cm) | Steering, Uncut circle radius: 15 in. (38 cm)
 - 74 in. (188 cm)
 - 47 in. (120 cm) | Mower cut: 1-4 in. (2.5-10.2 cm) | Cut increments: 0.25 in. (0.64 cm)
 - With mower: 62.5 in. (159 cm) | With mower (deflector raised for storage): 53.6 in. (136 cm) | Without mower: 45 in. (114 cm)
 - 51.2 in. (130.0 cm)
 - 48 in. (122 cm)
 - Steering: 19 in. (48.3 cm)
 - Back: 15 in. (38.1 cm)
 - Fore-aft adjustment (While seated, slide rail, 14-position): 7 in. (17.8 cm)
 - Large: 14 in. (35.6 cm)
 - Tank: 3.3 U.S. gal. (12.5 L)
 - Mower, no fuel: 755 lb (342 kg)
 - Two standard, incandescent, 27 W
 - Meets ANSI standard | Meets OPEI standard | Safety video
 - Open-back design with grasp | Suspension: Tilt, two coil springs, three-position no-tools adjustment for operator weight
 - Type: Hydraulic
 - Hood: Molded-in color hood material reduces sound, will not rust or dent
 - Fender: Stamped steel deck shell | Mower: Stamped steel deck shell, 10 gauge 0.135 in. (3.4 mm)
 - Bushings: Metal, replaceable
 - 13 positions
 - A used warranty may be available. Contact dealer for details.
 
- $3,300.00
 - Salisbury MD
 - Pre-Owned
 - 39666B
 - 2019
 - John Deere
 - X394
 - 1M0X394ACJM070182
 - 506