2019 John Deere X394

MoreLess
Limited Time Offer!

Selling Price -$3,300.00

  • Width:48 in
  • Transmission:Hydro
  • Engine Type:Gas
  • Drive Type:2WD
  • 2019
  • John Deere
  • X394
  • Base
  • Riding
  • Model: FS651V
  • Overhead valve, full-pressure lube, oil filter
  • 22 hp (16.4 kW)
  • 44.3 cu in. (726 cc)
  • V-twin, cast-iron liners
  • Mechanical
  • Separate levers, automatic choke return
  • Air
  • Dry, replaceable with foam precleaner
  • Transaxle: Internal, not replaceable
  • Gasoline
  • Delivery: Pulse pump, carburetor
  • Gauge on dash
  • Power, hydraulic
  • Mower: Electric power take-off (PTO) clutch, in-line belt | Mower attachability: Dual belt
  • Fuel tank location: Rear | Hourmeter | Cruise Control: button on dash | Oil cooler: Fins and fan on transaxle | Primer/paint: E-coat/powder | Floor mats: Sure-grip rubber | Storage: On fender and under seat | Service interval decal | Cup holder | All-wheel steer | Tilt steering wheel: Standard, five position | Preset cut height | Mower deck type: Side discharge | Mower wash port | Mower level adjustment: Exact Adjust ports and onboard deck-leveling gauge
  • Internal wet disc
  • Cast iron front axle, front wheel ball bearings
  • 15x6.5-8
  • 22x9.5-12
  • Mower: Four | Mower, adjustment: Seven-position, spring-loaded pin | Mower, rotate: 90 degrees for easy mower removal
  • Engine: Bendix
  • Flywheel alternator, regulated, 15 amp
  • 12 V (340 CCA)
  • Transaxle Forward speed: 0-6.2 mph (0-10 km/h) | Transaxle Reverse speed: 0-3.5 mph (0-5.6 km/h)
  • Equipment mounting: heavy duty | Mower attachability: Roll under tractor | Front draft arms: Attached with spring pins at two points | Rear draft arms: Quick-pull pins
  • Welded heavy-duty
  • Fuel fill opening, On left fender: 3 in. (7.6 cm) | Steering, Uncut circle radius: 15 in. (38 cm)
  • 74 in. (188 cm)
  • 47 in. (120 cm) | Mower cut: 1-4 in. (2.5-10.2 cm) | Cut increments: 0.25 in. (0.64 cm)
  • With mower: 62.5 in. (159 cm) | With mower (deflector raised for storage): 53.6 in. (136 cm) | Without mower: 45 in. (114 cm)
  • 51.2 in. (130.0 cm)
  • 48 in. (122 cm)
  • Steering: 19 in. (48.3 cm)
  • Back: 15 in. (38.1 cm)
  • Fore-aft adjustment (While seated, slide rail, 14-position): 7 in. (17.8 cm)
  • Large: 14 in. (35.6 cm)
  • Tank: 3.3 U.S. gal. (12.5 L)
  • Mower, no fuel: 755 lb (342 kg)
  • Two standard, incandescent, 27 W
  • Meets ANSI standard | Meets OPEI standard | Safety video
  • Open-back design with grasp | Suspension: Tilt, two coil springs, three-position no-tools adjustment for operator weight
  • Type: Hydraulic
  • Hood: Molded-in color hood material reduces sound, will not rust or dent
  • Fender: Stamped steel deck shell | Mower: Stamped steel deck shell, 10 gauge 0.135 in. (3.4 mm)
  • Bushings: Metal, replaceable
  • 13 positions
  • A used warranty may be available. Contact dealer for details.
  •  Calculation is estimate only.
  •  
  •  
  •  
  •  
  •  
  •  
  •  Quotes are estimates only, actual rate may vary slightly.
  •  One-Way toll road charges will be the responsibility of the customer.
  •  Additional fees and/or duties may apply to International and non-continental US shipping requests.
  • $3,300.00
  • Salisbury MD
  • Pre-Owned
  • 39666B
  • 2019
  • John Deere
  • X394
  • 1M0X394ACJM070182
  • 506
Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.