2025 John Deere X300 Select Series X350

MoreLess
Limited Time Offer!

Selling Price -

United States and Canada,Enviro Crate,MDF Charge
  • 2025
  • John Deere
  • X300 Select Series
  • X350
  • Riding
  • Model: FR651V
  • 16.0 kW (21.5 hp)
  • 726 cc (44.3 cu in.)
  • Overhead valve, full-pressure lube, oil filter
  • V-twin, cast-iron liners
  • Mechanical
  • method: Air
  • Dry, replaceable
  • Bendix
  • delivery: Pulse pump, carburetor
  • Gasoline | Fuel tank location: Rear
  • Gauge on dash
  • speed control: Separate levers, automatic choke return
  • Manual, sector and pinion
  • Mower: Electric power take-off (PTO) clutch, in-line belt | Mower attachability: Single belt
  • Internal wet disc
  • 20x10-8
  • 15x6-6
  • Mower: Two
  • 12 V / 340 CCA
  • Flywheel alternator, regulated, 12 amp
  • Forward: 0-8.9 km/h (0-5.5 mph) | Reverse: 0-6.4 km/h (0-4 mph)
  • mounting: Yes, heavy duty
  • Welded heavy-duty
  • Headlights: Two standard, incandescent, 27 W
  • Backup protection: Reverse Implement Option (RIO)
  • Fuel fill opening On left fender: 7.6 cm (3 in.) | Steering wheel - Large: 35.6 cm (14 in.) | Fore-aft adjustment - While seated, ball bearing slide rail, 15-position: 17 cm (6.6 in.) | Mower deck material: 12 gauge 2.7 mm (0.105 in.) | Mower wheels rotate: 90 degrees for easy mower removal
  • Accel Deep™ mower deck: 107 cm (42 in.)
  • 40.6 cm (16 in.) | Uncut circle: 66 cm (26 in.)
  • back: 38 cm (15 in.)
  • Mower cut: 13 positions, 2.5-10.2 cm (1-4 in.) | increments: 0.64 cm (0.25 in.) | 1171 mm (46.1 in.)
  • 1817 mm (71.5 in.)
  • 1255 mm (49.4 in.)
  • with mower: 1283 mm (50.5 in.) | with mower (deflector raised for storage): 1300 mm (51.2 in.) | without mower: 964 mm (38 in.)
  • tank: 12.5 L (3.3 U.S. gal.)
  • Maximum: 272 kg (600 lb)
  • 246 kg (543 lb)
  • Transaxle type: K46 hydrostatic integrated with transaxle | Transaxle control: Twin Touch™ pedals | Cruise control: Yes, button on dash | Primer/paint: E-coat/powder | Floor mats: Sure-grip rubber | Storage: Yes, under seat and covered toolbox | Mower deck: Side discharge | Mower attachability: Slide under tractor | Front draft arms: Attached with spring pins at two points | Rear draft arms: Two pins and spring clips
  • change: No-tools oil drain with replaceable filter | cooler: Fins and fan on transaxle | filter: Internal, not replaceable
  • Front axle: Cast iron front axle, front wheel ball bearings | Hood: Fully enclosed, molded-in color material reduces sound, will not rust or dent | Mower deck: Stamped steel deck shell
  • Fender: Stamped steel
  • Open-back design with grasp | suspension: Tilt, two coil springs, three-position no-tools adjustment for operator weight
  • Mower wheel adjustment: Four-position, tool required | Mower level adjustment: Exact Adjust ports and onboard deck-leveling gauge
  • 4 year/300 hour bumper-to-bumper
  •  Calculation is estimate only.
  •  
  •  
  •  
  •  
  •  
  •  
  •  Quotes are estimates only, actual rate may vary slightly.
  •  One-Way toll road charges will be the responsibility of the customer.
  •  Additional fees and/or duties may apply to International and non-continental US shipping requests.
  • Carlisle PA
  • New
  • H162566
  • 2025
  • John Deere
  • X300 Select Series X350
  • 726127
  • 0
Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.