2025 John Deere 1 Series 1023E
- Year 2025
- Make John Deere
- Model 1 Series
- Engine Model: 3TNM74F-NCJT
2025 John Deere 1 Series 1023E
- Powerful Final Tier 4-compliant diesel engine
- New, easy-lift hood with dual gas-charged lift struts
- AutoConnect™ mid-mower deck can be installed or removed in less than 5 minutes
- Easy-to-operate two speed hydrostatic transmission
Features may include:
Spend more time working and less time switching equipment with easy implement swaps1 Family Tractors are designed to minimize the time and effort needed to switch-out implements to accommodate different jobs.
- AutoConnect Deck System: Connect a mid-mount mower deck to the tractor in less than 60 seconds without leaving the seat except to lock the gauge wheels.
- Load-N-Go attachment: Easily move your 54D or 60D AutoConnect Deck with your John Deere Loader after it has been disconnected from the tractor with the Load-N-Go ramps.
- Quik-Park™ Loader System: 120R Quik-Park™ Loaders are designed for easy mounting and removal in about a minute, with no tools needed.
- Quik-Tatch™ front hitch: Save time switching front implements like a snow blower, rotary broom, or front blade without tools.
- iMatch™ quick-hitch: Easily hookup Category 1 implements in seconds using three fixed points to back in and pick up rear implements without leaving the seat
- Position control hitch: Set the rear hitch height and then consistently lower the hitch to the exact height every time, which is especially useful in grading and leveling applications.
- Quik-Knect™ system: Connect power take-off (PTO)-driven implements quickly and with low physical effort. The Quik-Knect system utilizes one connector for the tractor’s PTO shaft and a designated connector for each implement which eliminates twisting and forcing splines to align.
1 Family Tractors can have up to three implements mounted simultaneously due to standard dual selective control valves (SCVs), allowing you to switch from using one implement to another without stopping to adjust. When a third SCV kit is added, the number of possible combinations is greatly increased.
Quickly and easily change speed and directions with Twin Touch foot controls and Hydrostatic transmission (HST)The hydrostatic transmission’s infinite ground speeds and direction of travel are both controlled with the Twin Touch foot pedals.
- Ideal for loader or mower applications where frequent direction and speed changes are needed
- No clutching for fast direction changes
- Match the job at hand with infinite ground speeds
Both 4WD and power steering are standard equipment on the 1 Family Tractors. This combination allows for excellent maneuverability and ease of operation.
- Narrow overall width allows you to work in tight areas where most compact tractors just cannot fit. The 144.8-cm (57-in.) wheel base and 119.4 cm (47 in.) overall width gives great stability for all types of terrain.
- Power steering means fewer turns of the steering wheel than manual steering, which is especially valuable when mowing around obstacles or during front loader work.
- High horsepower-to-weight ratio makes the 1 Family Tractors a good choice for a variety of tasks. The overall tractor weight reduces ground compaction and makes them excellent for mowing.
- The fully-independent power take-off (PTO) allows engaging and disengaging of the PTO without stopping tractor movement. This is important when driving across obstacles such as driveways while mowing.
Engine
							Engine Power
							SAE J1995 rated power: 16 kW (21.5 hp) / 21.8 PS at 3200 rpm
						
						
							Engine Manufacturer
							Yanmar®
						
						
							Engine
							Model: 3TNM74F-NCJT
						
						
							Rated Engine Speed
							3200 rpm
						
						
							Aspiration
							Natural
						
						
							Emissions
							Compliance: Final Tier 4
						
						
							Displacement
							0.993 L (60.6 cu in.)
						
						
							Cylinder Liners
							Three cylinders | Cast-in-block
						
						
							Bore
							74 mm (2.91 in)
						
						
							Stroke
							77 mm (3.03 in.)
						
						
							Lubrication
							Pressurized
						
						
							Cooling System
							Water pump
						
						
							Air Cleaner
							Dual element
						
						
							Engine Torque
							At rated speed: 47.7 Nm (35.2 lb-ft)
						
						PTO
							PTO Power, Rated Engine Speed
							Power take-off (PTO) power: 12.1 kW (16.2 hp) | Rear: 540 rpm / Mid: 2100 rpm
						
						
							PTO Type
							Control: Independent
						
						Fuel System
							Fuel Type
							Diesel
						
						
							Compression Ratio
							23.5:1
						
						
							Fuel System
							Indirect injection
						
						Drivetrain
							Injection Pump Type
							Indirect injection
						
						
							Transmission
							Hydrostatic - two range
						
						
							Final Drive
							Spur gear
						
						
							Steering
							Power
						
						
							Clutch
							Wet disk
						
						Brakes
							Brake System Type
							Wet disc (left-hand pedal)
						
						Wheels & Tires
							Tires, Front Specification
							R3 Turf: 18x8.50-10 / R4: 18x8.5-10
						
						
							Tires, Rear Specification
							R3 Turf: 26x12-12 / R4: 26x12-12
						
						Battery
							Battery
							500 CCA
						
						Electric
							Alternator
							40 amp
						
						
							Electrical
							Starter size: 1.2 kW (1.6 hp)
						
						Hydraulics
							Hydraulic Type
							Open center | Remote control valves available: Three
						
						
							Hydraulic Pump
							Steering: 13.2 L/min (3.5 gpm) / Implement: 13.2 L/min (3.5 gpm) / 24 L/min (6.3 gpm)
						
						
							Maximum Pressure
							138 bar (2000 psi)
						
						
							Pump Type
							Single gear
						
						Chassis
							Hitch/Type
							Limited Category 1
						
						Dimensions
							Dimensions
							Front axle clearance: 195 mm (7.7 in.) | Front tread range: 931 mm (36.7 in.) / Rear tread spacing: 895 mm (35.2 in.)
						
						
							Wheelbase
							1450 mm (57.1 in.)
						
						
							Turning Radius
							Without brakes: Outside front tire: 2.51 m (8.2 ft)
						
						Capacities
							Hitch Lift Capacity
							24-in. behind link arms: 344 kg (758 lb)
						
						
							Fuel Capacity
							24 L (6.3 U.S. gal.)
						
						
							Axle Capacity, Front
							612 kg (1349 lb)
						
						
							Axle Capacity, Rear
							715 kg (1576 lb )
						
						
							Features
							Crankcase with filter: 2.7 L (2.9 qt)
						
						
							Hydraulic Capacity
							Transmission and hydraulic system: 12.3 L (3.2 gal.)
						
						Weights
							Weight, As Shipped
							Approximate shipping weight (open-station): 656 kg (1446 lb)
						
						Features
							Features
							Draft control sensing: Select control | Platform - flat/straddle: One-piece semi flat | Gear shift location - console/floor: Left-hand side
						
					 
 
     
	
 
							 Buy Equipment Online
Buy Equipment Online 
				