2024 John Deere 1 Series 1025R

2024 John Deere 1 Series 1025R

Swipe to View More

  • Year 2024
  • Make John Deere
  • Model 1 Series
  • Engine Model: 3TNV80F-NCJT
2024 John Deere 1 Series 1025R

2024 John Deere 1 Series 1025R

2024 John Deere 1 Series 1025R

  • Standard LED headlights and fender lights
  • Premium Operator Station with deluxe seat suspension and armrests
  • AutoConnect™ mid-mower deck can be installed or removed in less than 5 minutes

Features may include:

Spend more time working and less time switching equipment with easy implement swaps

1 Family Tractors are designed to minimize the time and effort needed to switch-out implements to accommodate different jobs.

  • AutoConnect Deck System: Connect a mid-mount mower deck to the tractor in less than 60 seconds without leaving the seat except to lock the gauge wheels.
  • Load-N-Go attachment: Easily move your 54D or 60D AutoConnect Deck with your John Deere Loader after it has been disconnected from the tractor with the Load-N-Go ramps.
  • Quik-Park™ Loader System: 120R Quik-Park™ Loaders are designed for easy mounting and removal in about a minute, with no tools needed.
  • Quik-Tatch™ front hitch: Save time switching front implements like a snow blower, rotary broom, or front blade without tools.
  • iMatch™ quick-hitch: Easily hookup Category 1 implements in seconds using three fixed points to back in and pick up rear implements without leaving the seat
  • Position control hitch: Set the rear hitch height and then consistently lower the hitch to the exact height every time, which is especially useful in grading and leveling applications.
  • Quik-Knect™ system: Connect power take-off (PTO)-driven implements quickly and with low physical effort. The Quik-Knect system utilizes one connector for the tractor’s PTO shaft and a designated connector for each implement which eliminates twisting and forcing splines to align.

1 Family Tractors can have up to three implements mounted simultaneously due to standard dual selective control valves (SCVs), allowing you to switch from using one implement to another without stopping to adjust. When a third SCV kit is added, the number of possible combinations is greatly increased.

Quickly and easily change speed and directions with Twin Touch foot controls and Hydrostatic transmission (HST)

The hydrostatic transmission’s infinite ground speeds and direction of travel are both controlled with the Twin Touch foot pedals.

  • Ideal for loader or mower applications where frequent direction and speed changes are needed
  • No clutching for fast direction changes
  • Match the job at hand with infinite ground speeds
Excellent maneuverability and easy operation with standard four-wheel drive (4WD) and power steering

Both 4WD and power steering are standard equipment on the 1 Family Tractors. This combination allows for excellent maneuverability and ease of operation.

  • Narrow overall width allows you to work in tight areas where most compact tractors just cannot fit. The 144.8-cm (57-in.) wheel base and 119.4 cm (47 in.) overall width gives great stability for all types of terrain.
  • Power steering means fewer turns of the steering wheel than manual steering, which is especially valuable when mowing around obstacles or during front loader work.
  • High horsepower-to-weight ratio makes the 1 Family Tractors a good choice for a variety of tasks. The overall tractor weight reduces ground compaction and makes them excellent for mowing.
  • The fully-independent power take-off (PTO) allows engaging and disengaging of the PTO without stopping tractor movement. This is important when driving across obstacles such as driveways while mowing.
Comfortable and convenient open operator’s station

The 1025R open operator station is designed for greater comfort and increased visibility.

Engine

Engine Power SAE J1995 rated power: 23.9 hp (17.8 kW) / 3200 rpm at 21.8 PS / 3200 seconds at 24.2 PS
Engine Manufacturer Yanmar®
Engine Model: 3TNV80F-NCJT
Rated Engine Speed 3200 rpm
Aspiration Natural
Emissions Compliance: Final Tier 4
Cylinder Liners Three cylinders | Cast-in-block
Displacement 77.3 cu in. (1.267 L)
Bore 3.15 in (80 mm)
Stroke 3.31 in. (84 mm)
Lubrication Pressurized
Cooling System Water pump
Air Cleaner Dual element with mechanical restriction indicator
Engine Torque At rated speed: 39.2 lb-ft (53.1 Nm)

PTO

PTO Power, Rated Engine Speed Power take-off (PTO) power: 17.2 hp (12.8 kW) | Rear: 540 rpm / Mid: 2100 rpm
PTO Type Control: Independent

Fuel System

Fuel Type Diesel
Compression Ratio 23.1:1
Fuel System Indirect injection

Drivetrain

Injection Pump Type Indirect injection
Transmission Hydrostatic - two range
Final Drive Spur gear
Steering Power
Clutch Wet disk

Brakes

Brake System Type Wet disc (left-hand pedal)

Wheels & Tires

Tires, Front Specification R3 Turf: 18x8.50-10 / R3 Turf Radial: 18x8.50-10 / R4: 18x8.5-10
Tires, Rear Specification R3 Turf: 26x12-12 / R4: 26x12-12

Battery

Battery 500 CCA

Electric

Alternator 40 amp
Electrical Starter size: 1.6 hp (1.2 kW)

Hydraulics

Hydraulic Type Open center | Remote control valves available: Three
Hydraulic Pump Steering: 3.5 gpm (13.2 L/min) / Implement: 3.5 gpm (13.2 L/min) / 6.3 gpm (24 L/min)
Pump Type Single gear
Maximum Pressure 2000 psi (138 bar)

Chassis

Hitch/Type Limited Category 1

Dimensions

Dimensions Front axle clearance: 7.7 in. (195 mm) | Front tread range: 36.7 in. (931 mm) / Rear tread spacing: 35.2 in. ( 895 mm)
Wheelbase 57.1 in. (1450 mm)
Turning Radius Without brakes: Outside front tire: 8.2 ft (2.51 m)

Capacities

Hitch Lift Capacity 24-in. behind link arms: 758 lb (344 kg)
Fuel Capacity 6.3 U.S. gal. (24 L)
Axle Capacity, Front 1349 lb (612 kg)
Axle Capacity, Rear 1576 lb (715 kg)
Features Crankcase with filter: 2.9 qt (2.7 L)
Hydraulic Capacity Transmission and hydraulic system: 3.2 gal. (12.3 L)

Weights

Weight, As Shipped Approximate shipping weight (open-station): 1556 lb (706 kg) / Cab: 1996 lb (906 kg)

Features

Features Draft control sensing: Position control | Platform - flat/straddle: One-piece semi flat | Gear shift location - console/floor: Left-hand side | Doors: Two
Seat Type equipment: Premium

Product Photography